WATERPROOFING ACADEMY 07

WP ACADEMY

 07 - PRODUCT-TYPES

NEVER design waterproofing solutions based on products. You need to do much more BEFORE choosing products. ALWAYS narrow down your options by starting at PRODUCT-TYPES level

  

 

WATERPROOFING PRODUCT-TYPES:

 

Self injecting waterstops (typically based on bentonite) for construction joints.

 


BASIC MATERIAL: POLYMER HYBRID. Hand applied CCP waterproofing. Curing happens due to moist in the a...

 


Profiled plastic membrane integrating with the concrete

 


Hand applied liquid membrane. Needs dry weather to cure

 


Sheet membrane. Post applied. Primer required.

 


Drainage sheets for sloped or vertical surfaces

 


Quick setting spray applied membrane.

 


Sheet/Foil membrane with Fibers on the (concrete-contact)surface, integrating with the concrete bein...

 


Bentonite clay between two layers of geo-synthetics

 


Structural waterstops typically made out of plastic, PVC or rubber

 


Hydrophilic waterstops which expands in the presence of moisture/water

 


Tiebolt waterproofing, with water-reactive plug

 


Injection hoses is most often meant to be a "safety-belt" ...

 


Metal waterstops can be categorised into "Passive" and "Active" and typically comes in fixed lengths...

 


Cold applied liquid plastic membranes for decks, balconies, roofing etc. (PMMA = Poly(methyl methacr...

 


Systems combining cement with a waterproofing agent, typically a synthetic polymer. Applied by rolle...

 



 

 

LET'S HAVE A TALK
ABOUT YOUR WATERPROOFING


  • Is this the right solution?
  • How can we design this detail?
  • Can we save money?
  • Are there things I should know about this product?
  • Does the installed solution look correct?
  • Something has gone wrong; we need an independent opinion!

and more...

 


BOOK A FREE DISCOVERY TALK